How to Do a Broken Car Key Repair

You’re in a hurry to get your work done and you put your keys into the ignition. Then you try turning it around, and it breaks inside the lock!

Luckily, there are several ways you can attempt to resolve the issue before calling a locksmith. Here are a few quick fixes. Super Glue.

1. Contact a locksmith

One of the most devastating things that can happen to the owner of a car is a damaged key in locks. This can be even more difficult if it happens while the driver is rushing to get to work or drop off a child. In this situation it is essential to act quickly and try to free the stuck key.

It is recommended to contact an experienced locksmith for this task for this job, as they will be able to use the appropriate tools to remove the broken key and not damage the lock. Many people are looking for something thin and stiff like toothpicks or paperclips. But it is not the best solution as they are too thick to fit into the lock.

The best solution is to use a pair tweezers. They are thin and easily fit inside the lock. They should be rigid enough to grab the broken part of a key and then pull it out. If you don’t have tweezers, it’s worth searching for a set that is available at auto parts stores. They are narrow and flat with hooks that are small enough to be placed into the key hole, and then hold on the broken piece of the key.

Another possible solution is to find an magnetic key hook that is able to attach to the metal in the lock and pull it out. This is not always the best choice as it could be caught under the lock and cause further damage. In such a situation it is advised to contact locksmith.

Some people try to join the two pieces of a broken car key with superglue in order to take it out of the lock. However, this is extremely risky since the pieces of metal may cling to each other and then fall apart later. how to repair car key lock is also essential not to turn the key as this can cause further damage to the lock or the ignition cylinder. It is best to contact an expert locksmith who will be ready to take the damaged key and then make an immediate replacement.

2. Drill into a hole

Even with a spare key, you may not be able to access your vehicle if the key breaks inside the lock. The lock could be drilled out. be the best option in these instances.

First, you must make sure the keyhole is positioned for a basic tumbler key. If it’s not then you won’t be able to drill out the pins without damaging the door and possibly destroying the internal lock mechanism.

The next step is to know that you’ll be drilling through the outer plastic layer and an inner layer of metal. A small drill bit is sufficient to get through these layers, but you need to be sure not to go any deeper than that. If you drill too deep it could cause damage to the wiring harness or cause the drill bit to stick in the hole.

Wearing a protective mask or equipment is recommended when using drilling. This will prevent dust and dirt from getting into your lungs.

It’s also a good idea if the broken key piece is still sticking out of the lock, to have pliers and tweezers in your bag. If the key is long enough to be gripped with tweezers and pliers, then it will be enough to get it out. If there isn’t, however you’ll need to use a tool such as this one to encase the tool in the lock and then rotate it towards the key to grasp it and pull it out of the hole.

3. Drill a nail

If you smash your car key in half, it can cause you to be stranded. There are fortunately several methods to fix it without having to pay for locksmith. The first option is to make use of a screw or nail. You can find these at home or in a hardware store. It is recommended to look for a nail that is as thin and long as possible. This means you can put it into the hole and then use epoxy glue to join the two pieces together. Make sure that the back of the nails is flat. This will allow it to fit into the slot cut in the key. how to repair car key lock will prevent it from moving, and could even prevent it from breaking again in the future.

4. Super Glue

Many motorists resort to DIY hacks, like using super glue, to repair a damaged key. This is a dangerous method. You could end up damaging the lock, and then have to shell out more to get a new one.

The first step is to take a look at the keys that are broken and make sure that they are identical in terms of size. This is crucial to ensure that all the pieces of the glue are aligned properly and that the key fits inside the lock once they’ve been put in place. After that, use a piece of sandpaper with fine-grit or a metal file to smooth out the edges on the damaged pieces of the key. This will strengthen the bond of glue and decrease the possibility of a key that is loose.

After you’ve polished the edges of the damaged key and polished them, apply a small amount of super glue to one of the ends. Use only tiny amounts of super glue as too much can make the key too large. It will then be difficult to fit into the lock. After aligning the two pieces of the key that broke then press them together. After a few minutes the glue will begin to set and bind the key fragments.

Another common household item that can be used to help to remove a damaged car key is a bobby pin which can be cut into a pick-like device and put into the lock. This method is especially useful when the damage is located within or close to the keyway or the ignition hole.

A broken car key with electronic components will require an entirely new key from the locksmith or dealer. This is because the key will have to be programmed using a new code and the key chip will need to be replaced. If only the metal or shell of the key breaks and needs to be replaced, you’ll need to have a new cut. You don’t have to reprogramme or replace the electronic components.