To explore barriers to academic activities that cardiovascular radiology-oriented radiology trainees face worldwide.

An international call for participation in an online survey was distributed via social media and radiological societies to radiology trainees. Questions covered barriers and involvement in academic activities during radiology training. Participants interested in cardiovascular radiology were selected for analysis with appropriate statistical methods.

Of the 892 respondents, 120 (13.5%) reported an interest in cardiovascular imaging. The majority (63.3%, 76/120) were from Europe and 57.5% (69/120) were men. There were gender discrepancies in academic involvement and in perceived gender-related barriers (perceived gender barrier in academic work between women and men 15/48 versus 5/69, respectively, p=0.001). The main barriers were lack of time, mentorship, and support. Most did not have protected academic time for research nor for teaching (61.7%, 74/120 and 57.5%, 69/120, respectively). Nonetheless, 40% (48/120) published as first authors, 77.5% (91/120) were involved academically in conferences, 71.7% (85/120) were positive about academic activities, 70.8% plan working in an academic setting, and 78.3% (94/120) would consider research training abroad.

Although the majority of respondents are positive about academic activities and plan to continue in the future, most do not have protected time. Lack of time, mentorship, and support were the main barriers. Fewer women declare involvement in academic work and output. There are significant perceived gender barriers to academic activities.

Although the majority of respondents are positive about academic activities and plan to continue in the future, most do not have protected time. Lack of time, mentorship, and support were the main barriers. Fewer women declare involvement in academic work and output. There are significant perceived gender barriers to academic activities.

Intraoral scanning has benefits over conventional impression making, but whether scanning is sufficiently accurate for multiple implants is unclear.

The purpose of this invitro study was to compare the trueness of digital scans acquired by using intraoral scanners from a small range to a complete arch with the conventional impression technique and to determine the influence of 2 different evaluation methods (best-fit algorithm versus absolute linear deviation) on the outcomes of accuracy assessment.

A mandibular model with 8 implants (A-H) around an edentulous arch was used as the master model. Open-format standard tessellation language (STL) data sets (1 reference file from a highly accurate dental laboratory scanner, 10 files from an intraoral scanner, and 10 files from digitized conventional impressions at room temperature) were imported to a metrology software program, and 5 groups of scanning ranges (AB, FGH, CDEF, BCDEFG, and ABCDEFGH) were identified simulating different clinical situations. Two significant lower accuracy was found when larger areas were encountered (groups BCDEFG and ABCDEFGH). Use of the absolute linear deviation method resulted in a higher mean score of inaccuracy than that from the best-fit algorithm method in most situations.

Scanning or impression methods, ranges, and evaluation methods affected the dimensional accuracy (trueness) of scans or impressions with multiple implants. Digital scans had worse trueness values compared with those made with the conventional splinting open-tray technique when cross-arch implant impressions were acquired.

Scanning or impression methods, ranges, and evaluation methods affected the dimensional accuracy (trueness) of scans or impressions with multiple implants. Digital scans had worse trueness values compared with those made with the conventional splinting open-tray technique when cross-arch implant impressions were acquired.

Limited data are available in the dental literature regarding the effect of ambient lighting on the consistency of color quantification in cross-polarized photography.

The purpose of this clinical study was to investigate the effects of ambient lighting conditions and postprocessing photograph calibration on color quantification in cross-polarized dental photography.

Twelve volunteers with intact maxillary central incisors were recruited. Cross-polarized photographs were captured under light-emitting diode (LED), fluorescent ceiling, and natural lighting. The photographs were repeated after a 1-week interval, yielding a total of 72 photographs. The average Commission Internationale de l’Eclairage L∗a∗b∗ coordinates of the right central incisor were obtained with a software program before and after calibration by using a neutral gray reference card. The color difference (ΔE) values were calculated for each participant between the repeated photographs under the change and no change in illumination both bepe and change in illumination had minimal effects on ΔE. Calibration through the use of a neutral gray reference card was found to result in reduced and imperceptible color change (ΔE≤1) for all illuminant types.

Previous studies on single-implant mandibular overdentures have reported favorable results for clinical and patient-reported outcomes. However, information from longer term clinical studies is lacking.

The purpose of this clinical study was to assess clinical, radiographic, and patient-reported outcomes of edentulous individuals rehabilitated with single-implant mandibular overdentures after a 5-year follow-up.

A prospective clinical study was performed including completely edentulous individuals who received new conventional complete dentures and then an external hexagon implant in the mandibular midline region, followed by the incorporation of a retention system (O-ring/ball attachment; Neodent). Data collection occurred at baseline and 3, 6, 12, 24, and 60 months after implant loading. Assessed outcomes included implant stability, peri-implant soft tissue condition, peri-implant marginal bone level, satisfaction with the prostheses, and oral health-related quality of life (OHRQoL). Clinical maintenanchanges in peri-implant soft tissue conditions were observed.

A single-implant mandibular overdenture effectively maintained the positive effect of the intervention on oral health-related quality of life and patient satisfaction, stable peri-implant condition, and acceptable rates of prosthetic events.

A single-implant mandibular overdenture effectively maintained the positive effect of the intervention on oral health-related quality of life and patient satisfaction, stable peri-implant condition, and acceptable rates of prosthetic events.Implant placement in the pterygoid region is a reliable treatment for posterior maxillary tooth loss. However, the surgery is not widely applied because the implant placement region is hard to access and the direct visual access is limited. This clinical report describes the use of a dynamic navigation system to improve the pterygoid implant placement surgery. Real-time imaging of the surgery area and full-time guidance are provided by the system to alleviate the problem of lack of visibility and to reduce the complexity of placement.

Computer-aided design and computer-aided manufacturing (CAD-CAM) methodologies allow the fabrication of custom dental implant abutments with a variety of materials and techniques. Studies on the mechanical strength of such components and the wear induced at their coupling interface during mechanical cycling are sparse.

The purpose of this invitro study was to measure the wear patterns at the hexagonal platform of dental implants induced by the installation and mechanical cycling of custom abutments fabricated by using 4 different CAD-CAM methods and to determine the compressive static resistance of the implant-abutment combinations.

A CAD software program was used to design a custom abutment for a single-unit screw-retained external hexagon dental implant crown. The same design file was used to manufacture with 4 CAM methods (N=40) milling and sintering of zirconium dioxide (ZO), cobalt-chromium (Co-Cr) sintered by selective laser melting (SLM), fully sintered machined Co-Cr alloy (MM), and machined and.38×10

(ZO), 2.0 ±0.29×10

(SLM), 1.0 ±0.38×10

(MM), 1.1 ±0.27×10

(AM), 1.1 ±0.33×10

(TI), and 0.51 ±0.29×10

(NI). The results indicated that, although significantly higher than those in in the control group (NI), the wear values found in the groups TI, ZO, MM, and AM were significantly lower than in the SLM group (P<.001).

The CAD-CAM abutments presented the same mechanical fracture load and wear measurements as the TI group, except for the SLM material, which showed increased wear. The failure mode from the load bearing test was the fracture of the abutments for the ZO group. The implants permanently deformed or fractured for the metal abutment groups.

The CAD-CAM abutments presented the same mechanical fracture load and wear measurements as the TI group, except for the SLM material, which showed increased wear. The failure mode from the load bearing test was the fracture of the abutments for the ZO group. The implants permanently deformed or fractured for the metal abutment groups.This clinical report describes the replacement of a traumatized maxillary canine that was extracted after unsuccessful orthodontic extrusion with an implant-supported restoration. Guided bone regeneration surgery was performed, followed by a second surgery with implant placement plus simultaneous bone and tissue regeneration. Esthetics and function were achieved with the placement of a veneered zirconia implant-supported restoration.

Laser sintering devices have been increasingly used to fabricate the metal frameworks of metal-ceramic restorations. In the fabrication process, the sintering layer thickness is an important parameter; however, information on how it may affect the flexural strength of metal frameworks remains limited.

The purpose of this invitro study was to evaluate the flexural strength of 3-unit and 4-unit cobalt-chromium (Co-Cr)metal frameworks laser sintered with 20-μm, 30-μm, and 40-μm layer thicknesses.

Three-unit and 4-unit master metal die models with premolar and molar abutments were prepared through direct metal laser sintering (DMLS). A total of 40 metal frameworks (n=10 for each metal die model) were fabricated by the lost-wax technique (group C, served as the control group) and through DMLS with 20-μm, 30-μm, and 40-μm layer thickness (experimental groups LS20, LS30, and LS40, respectively). Each metal framework was cemented to a master die with a polyvinyl siloxane impression material and then subjected taffect the flexural strength of the laser-sintered metal frameworks. However, the DMLS groups reported a higher mean flexural strength than the cast group.Prosthetic dentistry involves functional and esthetic restoration. Some situations require the use of fiber-reinforced composite resin posts that help preserve restorations. However, if the initial treatment fails, a new endodontic intervention may be required for fiber-reinforced composite resin post removal. This procedure can be complex and challenging but can be facilitated with guided endodontics. This clinical report describes the use of a prototyped guide created with virtual planning for fiber-reinforced composite resin post removal. The guide improved patient safety, shortened the treatment time, and eliminated the need for a new restoration.